Neewer i6T EX 600W TTL HSS Studio Strobe Flash Monolight for Canon Cameras

Description

-
Neewer i6T EX 600W 2.4G TTL Studio Strobe 1/8000 HSS Flash Monolight Compatible with Canon，Wireless Trigger/Modeling Lamp/Recycle in 0.2-1 Sec/Lithium Battery(400 Full Power Flashes)/Bowens Mount
500&&this.width/(this.height/500)<780)this.height=500;if(this.width>780)this.width=780;" height="500">
80&&this.width/(this.height/75)<75)this.height=75;if(this.width>75)this.width=75;" width="75">
Description:
This light is compatible with Canon 600D/700D/750D/800D/5D2/5D3/5D4/6D/6D2/7D/7D2/50D/60D/70D/80D/1D2/1D3/1D4/1DX/1DX2 Cameras.
14.8V 4000mA lithium battery provide 400 full power flashes and fast recycle time (0.2-1 seconds). Only need 4 hours to fully fill, with built-in overheating protection device.
There are 4 modes to adjust the brightness from 10% to 100% freely. The light can be used for both indoors and outdoor shooting.
The light including battery weighs only 2.15kg including battery, easy to use by hand directly or connect to light stands.
Specifications:
Material: Metal
Power Output (Max.): 600Ws
Flash Mode: TTL/M
Sync mode：High speed sync (up to 1/8000s)
M mode:1/1-1/128(+1/3EV) power Output
Channeland group: 9 channels (1-9) and 3 groups (A,B,C)
Personnal ID setting：00-99（100 total）
Wireless remote receiver:Built-in
Wireless range:2.4G，50m
Sync mode:Wireless trigger,Optical,Sync cable
Color Temperature: 5500+/-100k
Flash Duration(t0.5):1/450-1/18500s(Quick Mode),1/380-9500s(Ordinary Mode)
Modeling Lamp:15W LED,1500 Lumen,4 modes settable:F3-0 F3-1 F3-2 F3-3, brightness adjustable from 10%- 100%
Recycling Time: 0.2-1s(Quick Mode),0.3-3s(Ordinary Mode)
Flash Protection Function: Overheat/Overvoltage/Overcurrent/Flash Charging protection
Battery
Battery Cell type: Lithium-Ion
Battery Capacity: 4000mAh
Flashes Per Charge: 400 Flashes (Full Power)
Battery Size: 8x6x7.8cm/3.2x2.4x3.1 inch
Battery Weight: 0.4 kg/14.1 ounce
Power Source: AC 100-130V
Package Contents:
1x Strobe Flash for Canon
1x Flash Trigger for Canon (Battery Not Included)
1x LED Modeling Lamp (Included in the Flash)
1x Standard Reflector
1x Protective Cover
1x Diffuser
1x 110-130V AC Charger
COMPATIBILITY: Compatible with Canon 600D/700D/750D/800D/5D2/5D3/5D4/6D/6D2/7D/7D2/50D/60D/70D/80D/1D2/1D3/1D4/1DX/1DX2 Camera. Built-in 2.4G Receiver with 3 groups and 9 Channels. Trigger included. USB firmware upgrade helps keep pace with the latest technology
FUNCTION: With 4000mA Li-ion Battery, TTL/M function，600W Full Power，High Speed Sync 1/8000s. Large LCD Display, Power Output Adjustable 1/1-1/128, fast recycle time 0.2-1s and flash durations（t0.5）as short as 1/18500 sec
WIRELESS TRIGGER SYSTEM: Built-in 2.4G Wireless Trigger System, up to 9 Channels/3 Groups (A, B, C). Working distance: 50m. Also 100 personal ID passwords can be set freely
LED MODELING LAMP: 15W energy-saving LED，1500 Lumen,4 modes settable:F3-0 F3-1 F3-2 F3-3, brightness adjustable from 10%-100%.Stable color temperature at 5500+/-100K over the entire power range
LIGHTWEIGHT AND PORTABLE: Designed with Bowens Mount, more easily to connect with other photography equipment, and match with metal Bowens cover and white soft diffuser at the same time， and the light including battery weighs only 2.15kg, easy to carry for outdoor shooting
This item is
100% Brand New
. Never used. It comes with
2 Months
Warranty by Seller
.
The warranty enables the buyer to receive warranty repair or replacement from the term length described in the sale. Situations
NOT
covered by this warranty include physical damage to the item (dropping/impact damage, water damage, exposure to extreme heat/cold/pressure, etc), misuse, negligence, normal wear and tear, installation of non-factory software, or any other damage caused by use in a reckless or careless manner. The warranty guarantees the item will be free from manufacturer caused defect for the warranty length stated in this sale. Please contact our customer service team to claim your warranty if and when it should be needed.
By bidding on this item, the bidder agrees:
Returns without original box will NOT be accepted
. Buyers pay return shipping cost.
Please make the payment within
7 days
after winning the auction.
All sales are final. Warranty is provided via advertised warranty provider. Seller will assist with replacement only if item is defective within the warranty conditions.
If an item is received damaged, seller must be notified within
2 business days
of this damage. 5%-15% restocking fee will be charged if item is NOT defective or damaged.
For international orders, delivery time may be up to 20 business days.
Be sure shipping address with payment is correct. Seller CANNOT change the shipping address after payment.
*NO EXCEPTIONS!*
202092820750513