Impact Digital Monolight 300Ws with Bulb

Description

The
Impact Digital Monolight 300Ws
as part of the VSD Series of monolights is proof that a 300 watt-second monolight does not need to be expensive. The VSD300 provides enough stored power to easily light a portrait or small still-life setup. It has features found on monolights that cost twice as much.
This monolight has a digital readout coupled with its four-stop power variator. It accepts S-type monolight reflectors and head accessories. The VSD300 has cushioned touch-pad function control buttons. Power is adjustable in 1/10 stop increments, from full to 1/8 power. Its modeling light intensity may be controlled coupled to, or independent from, the strobe power levels you select.
This monolight has a limited auto-dump feature, which automatically fires the strobe when you reset to a lower power level.
Built-in optical slave sees the light from other flashes, and fires this monolight automatically.
A Sync cord with miniplug to PC connection is included.
Its recycle beep tone may be switched on or off.
Impact VSD-300 Specs
Flash Head
Maximum Power
300 Ws
Power Control
4 Stops in 1/10-Stop Increments
Guide Number
182' / 55.5 m at ISO100
Flash Duration
1/1800 to 1/800 Sec
Recycle Time
2 Sec (Full Power)
Flash Ready Indicator
Visual
Reflector
Changeable
Accessory Fitting Type
Bowens S Type
Modeling Light
Type
Tungsten
Wattage
100 W
Sync
Sync Type
Optical
Wireless Range
33' / 10 m (Radio)
Power
Circuit Protection
Fuse
General
Display
None
Auto Dump
Yes
Fan Cooled
No
Dimensions
H: 8.5 x W: 6.0 x L: 11.6" / H: 21.5 x W: 15.5 x L: 29.5 cm, Including Reflector
Weight
3.5 lb / 1.58 kg
**You're more than welcome to stop by and inspect any item before purchasing. You may message me to set up an appointment but please be advised -- I will not hold an item for you. So if an item you've arranged to inspect is bought by another customer then I will honor their purchase.**